Discover our next-generation of integrated UAV LiDAR solution. With Livox technology, YellowScan sets new standards for UAV LiDAR mapping.

YellowScan-Mapper-product-picture-1200x8

Solution presentation

New YellowScan Mapper is our Livox-based UAV LiDAR system.

YellowScan Mapper UAV LiDAR system is equipped with a high-performance Livox Horizon laser scanner from Livox, a DJI-backed company. With a great point density, this LiDAR sensor allows our LiDAR system to fly easily at 70m AGL with a 120m swath.

We recommend a balanced 10 m/s flight speed to benefit from Mapper point density while having good productivity. For example, flying at 70m AGL, 10 m/s, you will be able to map 10 ha in 3 minutes.

YellowScan Mapper is definitely the right LiDAR tool to start with. Your data collection will be fast, accurate and cost-effective.

EXPLORE MICASENSE SOLUTIONS

Our sensors are designed for optimal spectral and spatial resolution and feature a variety of integration options.

Key differentiators

Best cost-performance ratio
High point density and advanced accuracy and precision
Low-weight
Turn-key and simple to operate
Self-powered
Can be mounted quickly on any UAV, not only DJI UAV

Technologies inside

Livox Horizon Laser Scanner
Applanix APX-15 IMU
High-performance GNSS antenna

UAV Integration

Multirotor UAV
Fixed-wing UAV
Helicopter UAV

Features

Connect your Mapper LiDAR system to your DJI Skyport.

YellowScan Mapper can be associated with DJI Skyport. How could we miss this! Mapper is compatible with DJI M300…but not only. We have a bunch of customers flying their UAV with our product: multirotor, fixed-wing and helicopter drones.

If you already have a M300 or M600, we have the dedicated mounting to attach Mapper LiDAR to your UAV.

You‘ve got the power! A set of 2 worldwide certified batteries is shipped with the YellowScan Mapper.

They have high-performance and can be easily swapped in the field for more productivity.

You have 3 different ways to power your YellowScan Mapper. You can either use:

Skyport (on DJI M300 UAV)
External Power source with the dedicated port (UAV’s power)
YellowScan Mapper LiDAR system’s own power

Just land, remove the first battery set and replace it by the new one. Take-off again! YellowScan Mapper has 1h30 autonomy with its own battery.

Don’t miss anything before going back to the office with Live Data transmission.

In-flight LiDAR Data transmission is enabled by a dedicated port. The YellowScan Mapper is compatible with LiveStation, allowing live visualization of LiDAR data collection. Your mission has to be a success.

Easily carry your mapping solution with a backpack!

Let’s take advantage of this compact and lightweight LiDAR system. This time we thought it would be good having a backpack.

In this hardshell backpack with custom precut foam, you easily carry your LiDAR with everything you need (LiDAR system, software, batteries, laptop, data storage). This backpack has carry-on size to fit in any airline overhead compartment.

IPW55 protection

YellowScan Mapper has IPW55 protection meaning rain is not an issue during data collection: you have time to land. You can start your flight without rain in a weather that “might forecasts rain”. If during the flight it starts raining, there is no issue flying back home.

Your LiDAR is safe. The LiDAR system is equipped with non-slip rubber pads. You can lay your system down without fearing to damage it.

High-quality GPS antenna

The GNSS antenna provided is able to receive superior signal from GPS L1/L2/L5/L-band, GLONASS G1/G2/G3, BDS B1/B2/B3, Galileo E5a/E5b/E6/E1. It has IP-67 protection from dust and water and a low wind-resistance design.

High-quality GPS antenna is a must to get high-quality georeferenced point cloud. You deserve it.